This is Info file readline.info, produced by Makeinfo-1.55 from the input file rlman.texinfo. This document describes the GNU Readline Library, a utility which aids in the consistency of user interface across discrete programs that need to provide a command line interface. Copyright (C) 1988, 1991 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice pare preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Foundation. File: readline.info, Node: Top, Next: Command Line Editing, Prev: (DIR), Up: (DIR) GNU Readline Library ******************** This document describes the GNU Readline Library, a utility which aids in the consistency of user interface across discrete programs that need to provide a command line interface. * Menu: * Command Line Editing:: GNU Readline User's Manual. * Programming with GNU Readline:: GNU Readline Programmer's Manual. * Concept Index:: Index of concepts described in this manual. * Function and Variable Index:: Index of externally visible functions and variables. File: readline.info, Node: Command Line Editing, Next: Programming with GNU Readline, Prev: Top, Up: Top Command Line Editing ******************** This chapter describes the basic features of the GNU command line editing interface. * Menu: * Introduction and Notation:: Notation used in this text. * Readline Interaction:: The minimum set of commands for editing a line. * Readline Init File:: Customizing Readline from a user's view. * Bindable Readline Commands:: A description of most of the Readline commands available for binding * Readline vi Mode:: A short description of how to make Readline behave like the vi editor. File: readline.info, Node: Introduction and Notation, Next: Readline Interaction, Up: Command Line Editing Introduction to Line Editing ============================ The following paragraphs describe the notation used to represent keystrokes. The text C-k is read as `Control-K' and describes the character produced when the Control key is depressed and the k key is struck. The text M-k is read as `Meta-K' and describes the character produced when the meta key (if you have one) is depressed, and the k key is struck. If you do not have a meta key, the identical keystroke can be generated by typing ESC first, and then typing k. Either process is known as "metafying" the k key. The text M-C-k is read as `Meta-Control-k' and describes the character produced by "metafying" C-k. In addition, several keys have their own names. Specifically, DEL, ESC, LFD, SPC, RET, and TAB all stand for themselves when seen in this text, or in an init file (*note Readline Init File::., for more info). File: readline.info, Node: Readline Interaction, Next: Readline Init File, Prev: Introduction and Notation, Up: Command Line Editing Readline Interaction ==================== Often during an interactive session you type in a long line of text, only to notice that the first word on the line is misspelled. The Readline library gives you a set of commands for manipulating the text as you type it in, allowing you to just fix your typo, and not forcing you to retype the majority of the line. Using these editing commands, you move the cursor to the place that needs correction, and delete or insert the text of the corrections. Then, when you are satisfied with the line, you simply press RETURN. You do not have to be at the end of the line to press RETURN; the entire line is accepted regardless of the location of the cursor within the line. * Menu: * Readline Bare Essentials:: The least you need to know about Readline. * Readline Movement Commands:: Moving about the input line. * Readline Killing Commands:: How to delete text, and how to get it back! * Readline Arguments:: Giving numeric arguments to commands. File: readline.info, Node: Readline Bare Essentials, Next: Readline Movement Commands, Up: Readline Interaction Readline Bare Essentials ------------------------ In order to enter characters into the line, simply type them. The typed character appears where the cursor was, and then the cursor moves one space to the right. If you mistype a character, you can use your erase character to back up and delete the mistyped character. Sometimes you may miss typing a character that you wanted to type, and not notice your error until you have typed several other characters. In that case, you can type C-b to move the cursor to the left, and then correct your mistake. Afterwards, you can move the cursor to the right with C-f. When you add text in the middle of a line, you will notice that characters to the right of the cursor are `pushed over' to make room for the text that you have inserted. Likewise, when you delete text behind the cursor, characters to the right of the cursor are `pulled back' to fill in the blank space created by the removal of the text. A list of the basic bare essentials for editing the text of an input line follows. Move back one character. Move forward one character. Delete the character to the left of the cursor. Delete the character underneath the cursor. Printing characters Insert the character into the line at the cursor. Undo the last thing that you did. You can undo all the way back to an empty line. File: readline.info, Node: Readline Movement Commands, Next: Readline Killing Commands, Prev: Readline Bare Essentials, Up: Readline Interaction Readline Movement Commands -------------------------- The above table describes the most basic possible keystrokes that you need in order to do editing of the input line. For your convenience, many other commands have been added in addition to C-b, C-f, C-d, and DEL. Here are some commands for moving more rapidly about the line. Move to the start of the line. Move to the end of the line. Move forward a word. Move backward a word. Clear the screen, reprinting the current line at the top. Notice how C-f moves forward a character, while M-f moves forward a word. It is a loose convention that control keystrokes operate on characters while meta keystrokes operate on words. File: readline.info, Node: Readline Killing Commands, Next: Readline Arguments, Prev: Readline Movement Commands, Up: Readline Interaction Readline Killing Commands ------------------------- "Killing" text means to delete the text from the line, but to save it away for later use, usually by "yanking" (re-inserting) it back into the line. If the description for a command says that it `kills' text, then you can be sure that you can get the text back in a different (or the same) place later. When you use a kill command, the text is saved in a "kill-ring". Any number of consecutive kills save all of the killed text together, so that when you yank it back, you get it all. The kill ring is not line specific; the text that you killed on a previously typed line is available to be yanked back later, when you are typing another line. Here is the list of commands for killing text. Kill the text from the current cursor position to the end of the line. Kill from the cursor to the end of the current word, or if between words, to the end of the next word. M-DEL Kill from the cursor the start of the previous word, or if between words, to the start of the previous word. Kill from the cursor to the previous whitespace. This is different than M-DEL because the word boundaries differ. And, here is how to "yank" the text back into the line. Yanking means to copy the most-recently-killed text from the kill buffer. Yank the most recently killed text back into the buffer at the cursor. Rotate the kill-ring, and yank the new top. You can only do this if the prior command is C-y or M-y. File: readline.info, Node: Readline Arguments, Prev: Readline Killing Commands, Up: Readline Interaction Readline Arguments ------------------ You can pass numeric arguments to Readline commands. Sometimes the argument acts as a repeat count, other times it is the sign of the argument that is significant. If you pass a negative argument to a command which normally acts in a forward direction, that command will act in a backward direction. For example, to kill text back to the start of the line, you might type M- C-k. The general way to pass numeric arguments to a command is to type meta digits before the command. If the first `digit' you type is a minus sign (-), then the sign of the argument will be negative. Once you have typed one meta digit to get the argument started, you can type the remainder of the digits, and then the command. For example, to give the C-d command an argument of 10, you could type M-1 0 C-d. File: readline.info, Node: Readline Init File, Next: Bindable Readline Commands, Prev: Readline Interaction, Up: Command Line Editing Readline Init File ================== Although the Readline library comes with a set of Emacs-like keybindings installed by default, it is possible that you would like to use a different set of keybindings. You can customize programs that use Readline by putting commands in an "init" file in your home directory. The name of this file is taken from the value of the environment variable `INPUTRC'. If that variable is unset, the default is `~/.inputrc'. When a program which uses the Readline library starts up, the init file is read, and the key bindings are set. In addition, the `C-x C-r' command re-reads this init file, thus incorporating any changes that you might have made to it. * Menu: * Readline Init Syntax:: Syntax for the commands in the inputrc file. * Conditional Init Constructs:: Conditional key bindings in the inputrc file. File: readline.info, Node: Readline Init Syntax, Next: Conditional Init Constructs, Up: Readline Init File Readline Init Syntax -------------------- There are only a few basic constructs allowed in the Readline init file. Blank lines are ignored. Lines beginning with a # are comments. Lines beginning with a $ indicate conditional constructs (*note Conditional Init Constructs::.). Other lines denote variable settings and key bindings. Variable Settings You can change the state of a few variables in Readline by using the `set' command within the init file. Here is how you would specify that you wish to use `vi' line editing commands: set editing-mode vi Right now, there are only a few variables which can be set; so few, in fact, that we just list them here: `editing-mode' The `editing-mode' variable controls which editing mode you are using. By default, Readline starts up in Emacs editing mode, where the keystrokes are most similar to Emacs. This variable can be set to either `emacs' or `vi'. `horizontal-scroll-mode' This variable can be set to either `On' or `Off'. Setting it to `On' means that the text of the lines that you edit will scroll horizontally on a single screen line when they are longer than the width of the screen, instead of wrapping onto a new screen line. By default, this variable is set to `Off'. `mark-modified-lines' This variable, when set to `On', says to display an asterisk (`*') at the start of history lines which have been modified. This variable is `off' by default. `bell-style' Controls what happens when Readline wants to ring the terminal bell. If set to `none', Readline never rings the bell. If set to `visible', Readline uses a visible bell if one is available. If set to `audible' (the default), Readline attempts to ring the terminal's bell. `comment-begin' The string to insert at the beginning of the line when the `vi-comment' command is executed. The default value is `"#"'. `meta-flag' If set to `on', Readline will enable eight-bit input (it will not strip the eighth bit from the characters it reads), regardless of what the terminal claims it can support. The default value is `off'. `convert-meta' If set to `on', Readline will convert characters with the eigth bit set to an ASCII key sequence by stripping the eigth bit and prepending an ESC character, converting them to a meta-prefixed key sequence. The default value is `on'. `output-meta' If set to `on', Readline will display characters with the eighth bit set directly rather than as a meta-prefixed escape sequence. The default is `off'. `completion-query-items' The number of possible completions that determines when the user is asked whether he wants to see the list of possibilities. If the number of possible completions is greater than this value, Readline will ask the user whether or not he wishes to view them; otherwise, they are simply listed. The default limit is `100'. `keymap' Sets Readline's idea of the current keymap for key binding commands. Acceptable `keymap' names are `emacs', `emacs-standard', `emacs-meta', `emacs-ctlx', `vi', `vi-move', `vi-command', and `vi-insert'. `vi' is equivalent to `vi-command'; `emacs' is equivalent to `emacs-standard'. The default value is `emacs'. The value of the `editing-mode' variable also affects the default keymap. `show-all-if-ambiguous' This alters the default behavior of the completion functions. If set to `on', words which have more than one possible completion cause the matches to be listed immediately instead of ringing the bell. The default value is `off'. `expand-tilde' If set to `on', tilde expansion is performed when Readline attempts word completion. The default is `off'. Key Bindings The syntax for controlling key bindings in the init file is simple. First you have to know the name of the command that you want to change. The following pages contain tables of the command name, the default keybinding, and a short description of what the command does. Once you know the name of the command, simply place the name of the key you wish to bind the command to, a colon, and then the name of the command on a line in the init file. The name of the key can be expressed in different ways, depending on which is most comfortable for you. KEYNAME: FUNCTION-NAME or MACRO KEYNAME is the name of a key spelled out in English. For example: Control-u: universal-argument Meta-Rubout: backward-kill-word Control-o: ">&output" In the above example, `C-u' is bound to the function `universal-argument', and `C-o' is bound to run the macro expressed on the right hand side (that is, to insert the text `>&output' into the line). "KEYSEQ": FUNCTION-NAME or MACRO KEYSEQ differs from KEYNAME above in that strings denoting an entire key sequence can be specified, by placing the key sequence in double quotes. Some GNU Emacs style key escapes can be used, as in the following example, but the special character names are not recognized. "\C-u": universal-argument "\C-x\C-r": re-read-init-file "\e[11~": "Function Key 1" In the above example, `C-u' is bound to the function `universal-argument' (just as it was in the first example), `C-x C-r' is bound to the function `re-read-init-file', and `ESC [ 1 1 ~' is bound to insert the text `Function Key 1'. The following escape sequences are available when specifying key sequences: ``\C-'' control prefix ``\M-'' meta prefix ``\e'' an escape character ``\\'' backslash ``\"'' " ``\''' ' When entering the text of a macro, single or double quotes should be used to indicate a macro definition. Unquoted text is assumed to be a function name. Backslash will quote any character in the macro text, including " and '. For example, the following binding will make `C-x \' insert a single \ into the line: "\C-x\\": "\\" File: readline.info, Node: Conditional Init Constructs, Prev: Readline Init Syntax, Up: Readline Init File Conditional Init Constructs --------------------------- Readline implements a facility similar in spirit to the conditional compilation features of the C preprocessor which allows key bindings and variable settings to be performed as the result of tests. There are three parser directives used. `$if' The `$if' construct allows bindings to be made based on the editing mode, the terminal being used, or the application using Readline. The text of the test extends to the end of the line; no characters are required to isolate it. `mode' The `mode=' form of the `$if' directive is used to test whether Readline is in `emacs' or `vi' mode. This may be used in conjunction with the `set keymap' command, for instance, to set bindings in the `emacs-standard' and `emacs-ctlx' keymaps only if Readline is starting out in `emacs' mode. `term' The `term=' form may be used to include terminal-specific key bindings, perhaps to bind the key sequences output by the terminal's function keys. The word on the right side of the `=' is tested against the full name of the terminal and the portion of the terminal name before the first `-'. This allows SUN to match both SUN and SUN-CMD, for instance. `application' The APPLICATION construct is used to include application-specific settings. Each program using the Readline library sets the APPLICATION NAME, and you can test for it. This could be used to bind key sequences to functions useful for a specific program. For instance, the following command adds a key sequence that quotes the current or previous word in Bash: $if bash # Quote the current or previous word "\C-xq": "\eb\"\ef\"" $endif `$endif' This command, as you saw in the previous example, terminates an `$if' command. `$else' Commands in this branch of the `$if' directive are executed if the test fails. File: readline.info, Node: Bindable Readline Commands, Next: Readline vi Mode, Prev: Readline Init File, Up: Command Line Editing Bindable Readline Commands ========================== * Menu: * Commands For Moving:: Moving about the line. * Commands For History:: Getting at previous lines. * Commands For Text:: Commands for changing text. * Commands For Killing:: Commands for killing and yanking. * Numeric Arguments:: Specifying numeric arguments, repeat counts. * Commands For Completion:: Getting Readline to do the typing for you. * Keyboard Macros:: Saving and re-executing typed characters * Miscellaneous Commands:: Other miscellaneous commands. File: readline.info, Node: Commands For Moving, Next: Commands For History, Up: Bindable Readline Commands Commands For Moving ------------------- `beginning-of-line (C-a)' Move to the start of the current line. `end-of-line (C-e)' Move to the end of the line. `forward-char (C-f)' Move forward a character. `backward-char (C-b)' Move back a character. `forward-word (M-f)' Move forward to the end of the next word. Words are composed of letters and digits. `backward-word (M-b)' Move back to the start of this, or the previous, word. Words are composed of letters and digits. `clear-screen (C-l)' Clear the screen and redraw the current line, leaving the current line at the top of the screen. `redraw-current-line ()' Refresh the current line. By default, this is unbound. File: readline.info, Node: Commands For History, Next: Commands For Text, Prev: Commands For Moving, Up: Bindable Readline Commands Commands For Manipulating The History ------------------------------------- `accept-line (Newline, Return)' Accept the line regardless of where the cursor is. If this line is non-empty, add it to the history list. If this line was a history line, then restore the history line to its original state. `previous-history (C-p)' Move `up' through the history list. `next-history (C-n)' Move `down' through the history list. `beginning-of-history (M-<)' Move to the first line in the history. `end-of-history (M->)' Move to the end of the input history, i.e., the line you are entering. `reverse-search-history (C-r)' Search backward starting at the current line and moving `up' through the history as necessary. This is an incremental search. `forward-search-history (C-s)' Search forward starting at the current line and moving `down' through the the history as necessary. This is an incremental search. `non-incremental-reverse-search-history (M-p)' Search backward starting at the current line and moving `up' through the history as necessary using a non-incremental search for a string supplied by the user. `non-incremental-forward-search-history (M-n)' Search forward starting at the current line and moving `down' through the the history as necessary using a non-incremental search for a string supplied by the user. `history-search-forward ()' Search forward through the history for the string of characters between the start of the current line and the current point. This is a non-incremental search. By default, this command is unbound. `history-search-backward ()' Search backward through the history for the string of characters between the start of the current line and the current point. This is a non-incremental search. By default, this command is unbound. `yank-nth-arg (M-C-y)' Insert the first argument to the previous command (usually the second word on the previous line). With an argument N, insert the Nth word from the previous command (the words in the previous command begin with word 0). A negative argument inserts the Nth word from the end of the previous command. `yank-last-arg (M-., M-_)' Insert last argument to the previous command (the last word on the previous line). With an argument, behave exactly like `yank-nth-arg'. File: readline.info, Node: Commands For Text, Next: Commands For Killing, Prev: Commands For History, Up: Bindable Readline Commands Commands For Changing Text -------------------------- `delete-char (C-d)' Delete the character under the cursor. If the cursor is at the beginning of the line, there are no characters in the line, and the last character typed was not C-d, then return EOF. `backward-delete-char (Rubout)' Delete the character behind the cursor. A numeric arg says to kill the characters instead of deleting them. `quoted-insert (C-q, C-v)' Add the next character that you type to the line verbatim. This is how to insert key sequences like C-q, for example. `tab-insert (M-TAB)' Insert a tab character. `self-insert (a, b, A, 1, !, ...)' Insert yourself. `transpose-chars (C-t)' Drag the character before the cursor forward over the character at the cursor, moving the cursor forward as well. If the insertion point is at the end of the line, then this transposes the last two characters of the line. Negative argumentss don't work. `transpose-words (M-t)' Drag the word behind the cursor past the word in front of the cursor moving the cursor over that word as well. `upcase-word (M-u)' Uppercase the current (or following) word. With a negative argument, do the previous word, but do not move the cursor. `downcase-word (M-l)' Lowercase the current (or following) word. With a negative argument, do the previous word, but do not move the cursor. `capitalize-word (M-c)' Capitalize the current (or following) word. With a negative argument, do the previous word, but do not move the cursor. File: readline.info, Node: Commands For Killing, Next: Numeric Arguments, Prev: Commands For Text, Up: Bindable Readline Commands Killing And Yanking ------------------- `kill-line (C-k)' Kill the text from the current cursor position to the end of the line. `backward-kill-line (C-x Rubout)' Kill backward to the beginning of the line. `unix-line-discard (C-u)' Kill backward from the cursor to the beginning of the current line. Save the killed text on the kill-ring. `kill-whole-line ()' Kill all characters on the current line, no matter where the cursor is. By default, this is unbound. `kill-word (M-d)' Kill from the cursor to the end of the current word, or if between words, to the end of the next word. Word boundaries are the same as `forward-word'. `backward-kill-word (M-DEL)' Kill the word behind the cursor. Word boundaries are the same as `backward-word'. `unix-word-rubout (C-w)' Kill the word behind the cursor, using white space as a word boundary. The killed text is saved on the kill-ring. `delete-horizontal-space ()' Delete all spaces and tabs around point. By default, this is unbound. `yank (C-y)' Yank the top of the kill ring into the buffer at the current cursor position. `yank-pop (M-y)' Rotate the kill-ring, and yank the new top. You can only do this if the prior command is yank or yank-pop. File: readline.info, Node: Numeric Arguments, Next: Commands For Completion, Prev: Commands For Killing, Up: Bindable Readline Commands Specifying Numeric Arguments ---------------------------- `digit-argument (M-0, M-1, ... M--)' Add this digit to the argument already accumulating, or start a new argument. M- starts a negative argument. `universal-argument ()' Each time this is executed, the argument count is multiplied by four. The argument count is initially one, so executing this function the first time makes the argument count four. By default, this is not bound to a key. File: readline.info, Node: Commands For Completion, Next: Keyboard Macros, Prev: Numeric Arguments, Up: Bindable Readline Commands Letting Readline Type For You ----------------------------- `complete (TAB)' Attempt to do completion on the text before the cursor. This is application-specific. Generally, if you are typing a filename argument, you can do filename completion; if you are typing a command, you can do command completion, if you are typing in a symbol to GDB, you can do symbol name completion, if you are typing in a variable to Bash, you can do variable name completion, and so on. `possible-completions (M-?)' List the possible completions of the text before the cursor. `insert-completions ()' Insert all completions of the text before point that would have been generated by `possible-completions'. By default, this is not bound to a key. File: readline.info, Node: Keyboard Macros, Next: Miscellaneous Commands, Prev: Commands For Completion, Up: Bindable Readline Commands Keyboard Macros --------------- `start-kbd-macro (C-x ()' Begin saving the characters typed into the current keyboard macro. `end-kbd-macro (C-x ))' Stop saving the characters typed into the current keyboard macro and save the definition. `call-last-kbd-macro (C-x e)' Re-execute the last keyboard macro defined, by making the characters in the macro appear as if typed at the keyboard. File: readline.info, Node: Miscellaneous Commands, Prev: Keyboard Macros, Up: Bindable Readline Commands Some Miscellaneous Commands --------------------------- `re-read-init-file (C-x C-r)' Read in the contents of your init file, and incorporate any bindings or variable assignments found there. `abort (C-g)' Abort the current editing command and ring the terminal's bell (subject to the setting of `bell-style'). `do-uppercase-version (M-a, M-b, ...)' Run the command that is bound to the corresoponding uppercase character. `prefix-meta (ESC)' Make the next character that you type be metafied. This is for people without a meta key. Typing `ESC f' is equivalent to typing `M-f'. `undo (C-_, C-x C-u)' Incremental undo, separately remembered for each line. `revert-line (M-r)' Undo all changes made to this line. This is like typing the `undo' command enough times to get back to the beginning. `tilde-expand (M-~)' Perform tilde expansion on the current word. `dump-functions ()' Print all of the functions and their key bindings to the readline output stream. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an INPUTRC file. File: readline.info, Node: Readline vi Mode, Prev: Bindable Readline Commands, Up: Command Line Editing Readline vi Mode ================ While the Readline library does not have a full set of `vi' editing functions, it does contain enough to allow simple editing of the line. The Readline `vi' mode behaves as specified in the Posix 1003.2 standard. In order to switch interactively between `Emacs' and `Vi' editing modes, use the command M-C-j (toggle-editing-mode). The Readline default is `emacs' mode. When you enter a line in `vi' mode, you are already placed in `insertion' mode, as if you had typed an `i'. Pressing ESC switches you into `command' mode, where you can edit the text of the line with the standard `vi' movement keys, move to previous history lines with `k', and following lines with `j', and so forth. This document describes the GNU Readline Library, a utility for aiding in the consitency of user interface across discrete programs that need to provide a command line interface. Copyright (C) 1988, 1994 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice pare preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Foundation. File: readline.info, Node: Programming with GNU Readline, Next: Concept Index, Prev: Command Line Editing, Up: Top Programming with GNU Readline ***************************** This chapter describes the interface between the GNU Readline Library and other programs. If you are a programmer, and you wish to include the features found in GNU Readline such as completion, line editing, and interactive history manipulation in your own programs, this section is for you. * Menu: * Basic Behavior:: Using the default behavior of Readline. * Custom Functions:: Adding your own functions to Readline. * Readline Convenience Functions:: Functions which Readline supplies to aid in writing your own * Custom Completers:: Supplanting or supplementing Readline's completion functions. File: readline.info, Node: Basic Behavior, Next: Custom Functions, Up: Programming with GNU Readline Basic Behavior ============== Many programs provide a command line interface, such as `mail', `ftp', and `sh'. For such programs, the default behaviour of Readline is sufficient. This section describes how to use Readline in the simplest way possible, perhaps to replace calls in your code to `gets()' or `fgets ()'. The function `readline ()' prints a prompt and then reads and returns a single line of text from the user. The line `readline' returns is allocated with `malloc ()'; you should `free ()' the line when you are done with it. The declaration for `readline' in ANSI C is `char *readline (char *PROMPT);' So, one might say `char *line = readline ("Enter a line: ");' in order to read a line of text from the user. The line returned has the final newline removed, so only the text remains. If `readline' encounters an `EOF' while reading the line, and the line is empty at that point, then `(char *)NULL' is returned. Otherwise, the line is ended just as if a newline had been typed. If you want the user to be able to get at the line later, (with C-p for example), you must call `add_history ()' to save the line away in a "history" list of such lines. `add_history (line)'; For full details on the GNU History Library, see the associated manual. It is preferable to avoid saving empty lines on the history list, since users rarely have a burning need to reuse a blank line. Here is a function which usefully replaces the standard `gets ()' library function, and has the advantage of no static buffer to overflow: /* A static variable for holding the line. */ static char *line_read = (char *)NULL; /* Read a string, and return a pointer to it. Returns NULL on EOF. */ char * rl_gets () { /* If the buffer has already been allocated, return the memory to the free pool. */ if (line_read) { free (line_read); line_read = (char *)NULL; } /* Get a line from the user. */ line_read = readline (""); /* If the line has any text in it, save it on the history. */ if (line_read && *line_read) add_history (line_read); return (line_read); } This function gives the user the default behaviour of TAB completion: completion on file names. If you do not want Readline to complete on filenames, you can change the binding of the TAB key with `rl_bind_key ()'. `int rl_bind_key (int KEY, int (*FUNCTION)());' `rl_bind_key ()' takes two arguments: KEY is the character that you want to bind, and FUNCTION is the address of the function to call when KEY is pressed. Binding TAB to `rl_insert ()' makes TAB insert itself. `rl_bind_key ()' returns non-zero if KEY is not a valid ASCII character code (between 0 and 255). Thus, to disable the default TAB behavior, the following suffices: `rl_bind_key ('\t', rl_insert);' This code should be executed once at the start of your program; you might write a function called `initialize_readline ()' which performs this and other desired initializations, such as installing custom completers (*note Custom Completers::.). File: readline.info, Node: Custom Functions, Next: Readline Convenience Functions, Prev: Basic Behavior, Up: Programming with GNU Readline Custom Functions ================ Readline provides many functions for manipulating the text of the line, but it isn't possible to anticipate the needs of all programs. This section describes the various functions and variables defined within the Readline library which allow a user program to add customized functionality to Readline. * Menu: * The Function Type:: C declarations to make code readable. * Function Writing:: Variables and calling conventions. File: readline.info, Node: The Function Type, Next: Function Writing, Up: Custom Functions The Function Type ----------------- For readabilty, we declare a new type of object, called "Function". A `Function' is a C function which returns an `int'. The type declaration for `Function' is: `typedef int Function ();' The reason for declaring this new type is to make it easier to write code describing pointers to C functions. Let us say we had a variable called FUNC which was a pointer to a function. Instead of the classic C declaration `int (*)()func;' we may write `Function *func;' Similarly, there are typedef void VFunction (); typedef char *CPFunction (); and typedef char **CPPFunction (); for functions returning no value, `pointer to char', and `pointer to pointer to char', respectively. File: readline.info, Node: Function Writing, Prev: The Function Type, Up: Custom Functions Writing a New Function ---------------------- In order to write new functions for Readline, you need to know the calling conventions for keyboard-invoked functions, and the names of the variables that describe the current state of the line read so far. The calling sequence for a command `foo' looks like `foo (int count, int key)' where COUNT is the numeric argument (or 1 if defaulted) and KEY is the key that invoked this function. It is completely up to the function as to what should be done with the numeric argument. Some functions use it as a repeat count, some as a flag, and others to choose alternate behavior (refreshing the current line as opposed to refreshing the screen, for example). Some choose to ignore it. In general, if a function uses the numeric argument as a repeat count, it should be able to do something useful with both negative and positive arguments. At the very least, it should be aware that it can be passed a negative argument. - Variable: char * rl_line_buffer This is the line gathered so far. You are welcome to modify the contents of the line, but see *Note Allowing Undoing::. - Variable: int rl_point The offset of the current cursor position in `rl_line_buffer' (the *point*). - Variable: int rl_end The number of characters present in `rl_line_buffer'. When `rl_point' is at the end of the line, `rl_point' and `rl_end' are equal. - Variable: int rl_mark The mark (saved position) in the current line. If set, the mark and point define a *region*. - Variable: int rl_done Setting this to a non-zero value causes Readline to return the current line immediately. - Variable: int rl_pending_input Setting this to a value makes it the next keystroke read. This is a way to stuff a single character into the input stream. - Variable: char * rl_prompt The prompt Readline uses. This is set from the argument to `readline ()', and should not be assigned to directly. - Variable: char * rl_terminal_name The terminal type, used for initialization. - Variable: char * rl_readline_name This variable is set to a unique name by each application using Readline. The value allows conditional parsing of the inputrc file (*note Conditional Init Constructs::.). - Variable: FILE * rl_instream The stdio stream from which Readline reads input. - Variable: FILE * rl_outstream The stdio stream to which Readline performs output. - Variable: Function * rl_startup_hook If non-zero, this is the address of a function to call just before `readline' prints the first prompt. File: readline.info, Node: Readline Convenience Functions, Next: Custom Completers, Prev: Custom Functions, Up: Programming with GNU Readline Readline Convenience Functions ============================== * Menu: * Function Naming:: How to give a function you write a name. * Keymaps:: Making keymaps. * Binding Keys:: Changing Keymaps. * Associating Function Names and Bindings:: Translate function names to key sequences. * Allowing Undoing:: How to make your functions undoable. * Redisplay:: Functions to control line display. * Modifying Text:: Functions to modify `rl_line_buffer'. * Utility Functions:: Generally useful functions and hooks. File: readline.info, Node: Function Naming, Next: Keymaps, Up: Readline Convenience Functions Naming a Function ----------------- The user can dynamically change the bindings of keys while using Readline. This is done by representing the function with a descriptive name. The user is able to type the descriptive name when referring to the function. Thus, in an init file, one might find Meta-Rubout: backward-kill-word This binds the keystroke Meta-Rubout to the function *descriptively* named `backward-kill-word'. You, as the programmer, should bind the functions you write to descriptive names as well. Readline provides a function for doing that: - Function: int rl_add_defun (char *name, Function *function, int key) Add NAME to the list of named functions. Make FUNCTION be the function that gets called. If KEY is not -1, then bind it to FUNCTION using `rl_bind_key ()'. Using this function alone is sufficient for most applications. It is the recommended way to add a few functions to the default functions that Readline has built in. If you need to do something other than adding a function to Readline, you may need to use the underlying functions described below. File: readline.info, Node: Keymaps, Next: Binding Keys, Prev: Function Naming, Up: Readline Convenience Functions Selecting a Keymap ------------------ Key bindings take place on a "keymap". The keymap is the association between the keys that the user types and the functions that get run. You can make your own keymaps, copy existing keymaps, and tell Readline which keymap to use. - Function: Keymap rl_make_bare_keymap () Returns a new, empty keymap. The space for the keymap is allocated with `malloc ()'; you should `free ()' it when you are done. - Function: Keymap rl_copy_keymap (Keymap map) Return a new keymap which is a copy of MAP. - Function: Keymap rl_make_keymap () Return a new keymap with the printing characters bound to rl_insert, the lowercase Meta characters bound to run their equivalents, and the Meta digits bound to produce numeric arguments. - Function: void rl_discard_keymap (Keymap keymap) Free the storage associated with KEYMAP. Readline has several internal keymaps. These functions allow you to change which keymap is active. - Function: Keymap rl_get_keymap () Returns the currently active keymap. - Function: void rl_set_keymap (Keymap keymap) Makes KEYMAP the currently active keymap. - Function: Keymap rl_get_keymap_by_name (char *name) Return the keymap matching NAME. NAME is one which would be supplied in a `set keymap' inputrc line (*note Readline Init File::.). File: readline.info, Node: Binding Keys, Next: Associating Function Names and Bindings, Prev: Keymaps, Up: Readline Convenience Functions Binding Keys ------------ You associate keys with functions through the keymap. Readline has several internal keymaps: `emacs_standard_keymap', `emacs_meta_keymap', `emacs_ctlx_keymap', `vi_movement_keymap', and `vi_insertion_keymap'. `emacs_standard_keymap' is the default, and the examples in this manual assume that. These functions manage key bindings. - Function: int rl_bind_key (int key, Function *function) Binds KEY to FUNCTION in the currently active keymap. Returns non-zero in the case of an invalid KEY. - Function: int rl_bind_key_in_map (int key, Function *function, Keymap map) Bind KEY to FUNCTION in MAP. Returns non-zero in the case of an invalid KEY. - Function: int rl_unbind_key (int key) Bind KEY to the null function in the currently active keymap. Returns non-zero in case of error. - Function: int rl_unbind_key_in_map (int key, Keymap map) Bind KEY to the null function in MAP. Returns non-zero in case of error. - Function: int rl_generic_bind (int type, char *keyseq, char *data, Keymap map) Bind the key sequence represented by the string KEYSEQ to the arbitrary pointer DATA. TYPE says what kind of data is pointed to by DATA; this can be a function (`ISFUNC'), a macro (`ISMACR'), or a keymap (`ISKMAP'). This makes new keymaps as necessary. The initial keymap in which to do bindings is MAP. - Function: int rl_parse_and_bind (char *line) Parse LINE as if it had been read from the `inputrc' file and perform any key bindings and variable assignments found (*note Readline Init File::.). File: readline.info, Node: Associating Function Names and Bindings, Next: Allowing Undoing, Prev: Binding Keys, Up: Readline Convenience Functions Associating Function Names and Bindings --------------------------------------- These functions allow you to find out what keys invoke named functions and the functions invoked by a particular key sequence. - Function: Function * rl_named_function (char *name) Return the function with name NAME. - Function: Function * rl_function_of_keyseq (char *keyseq, Keymap map, int *type) Return the function invoked by KEYSEQ in keymap MAP. If MAP is NULL, the current keymap is used. If TYPE is not NULL, the type of the object is returned in it (one of `ISFUNC', `ISKMAP', or `ISMACR'). - Function: char ** rl_invoking_keyseqs (Function *function) Return an array of strings representing the key sequences used to invoke FUNCTION in the current keymap. - Function: char ** rl_invoking_keyseqs_in_map (Function *function, Keymap map) Return an array of strings representing the key sequences used to invoke FUNCTION in the keymap MAP. File: readline.info, Node: Allowing Undoing, Next: Redisplay, Prev: Associating Function Names and Bindings, Up: Readline Convenience Functions Allowing Undoing ---------------- Supporting the undo command is a painless thing, and makes your functions much more useful. It is certainly easy to try something if you know you can undo it. I could use an undo function for the stock market. If your function simply inserts text once, or deletes text once, and uses `rl_insert_text ()' or `rl_delete_text ()' to do it, then undoing is already done for you automatically. If you do multiple insertions or multiple deletions, or any combination of these operations, you should group them together into one operation. This is done with `rl_begin_undo_group ()' and `rl_end_undo_group ()'. The types of events that can be undone are: enum undo_code { UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END }; Notice that `UNDO_DELETE' means to insert some text, and `UNDO_INSERT' means to delete some text. That is, the undo code tells undo what to undo, not how to undo it. `UNDO_BEGIN' and `UNDO_END' are tags added by `rl_begin_undo_group ()' and `rl_end_undo_group ()'. - Function: int rl_begin_undo_group () Begins saving undo information in a group construct. The undo information usually comes from calls to `rl_insert_text ()' and `rl_delete_text ()', but could be the result of calls to `rl_add_undo ()'. - Function: int rl_end_undo_group () Closes the current undo group started with `rl_begin_undo_group ()'. There should be one call to `rl_end_undo_group ()' for each call to `rl_begin_undo_group ()'. - Function: void rl_add_undo (enum undo_code what, int start, int end, char *text) Remember how to undo an event (according to WHAT). The affected text runs from START to END, and encompasses TEXT. - Function: void free_undo_list () Free the existing undo list. - Function: int rl_do_undo () Undo the first thing on the undo list. Returns `0' if there was nothing to undo, non-zero if something was undone. Finally, if you neither insert nor delete text, but directly modify the existing text (e.g., change its case), call `rl_modifying ()' once, just before you modify the text. You must supply the indices of the text range that you are going to modify. - Function: int rl_modifying (int start, int end) Tell Readline to save the text between START and END as a single undo unit. It is assumed that you will subsequently modify that text. File: readline.info, Node: Redisplay, Next: Modifying Text, Prev: Allowing Undoing, Up: Readline Convenience Functions Redisplay --------- - Function: int rl_redisplay () Change what's displayed on the screen to reflect the current contents of `rl_line_buffer'. - Function: int rl_forced_update_display () Force the line to be updated and redisplayed, whether or not Readline thinks the screen display is correct. - Function: int rl_on_new_line () Tell the update routines that we have moved onto a new (empty) line, usually after ouputting a newline. - Function: int rl_reset_line_state () Reset the display state to a clean state and redisplay the current line starting on a new line. - Function: int rl_message (va_alist) The arguments are a string as would be supplied to `printf'. The resulting string is displayed in the "echo area". The echo area is also used to display numeric arguments and search strings. - Function: int rl_clear_message () Clear the message in the echo area.